Members Only: Cross-Post | Global Search | My Showroom | Biz Logbook | Mailing List | Add My Site
Now you are here Home > Trade Leads > Details

Member Login

Member ID:

Forget Password?
Click here
Register Here

Biz Resources

Trade Leads

Post My Leads

Company List

Biz Channels

News about China

Market Watch

[ Sell ]

??Choke Manifold1.ApplicationChoke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling,Website:, as it is, the device is adopted to execute new drilling-well???s technique of balance pressure, which can avoid pollution of oil-layer, improve the speed of drilling and control blowout effectively. One end of the device connects with the side flange of BOP spool. When BOP closes, it can control the finite pressure from casing by adjusting the choke valve???s opening, so balanced drilling?? can work under minimum pressure-difference.2.Assembly & structureChoke manifold consists of choke valve, gate valve, pipeline, fittings and pressure gauge etc, see gate valve part and choke valve part in the above drawing.3.Working principleWhen the pressure rising in well, fluid in well can be released in utilization of the choke valve opening/closing in choke manifold to control casing pressure, which can directly blow out through gate valve as the casing pressure is quite high.4.SpecificationPressure level is divided into five levels, i.e 14Mpa, 21Mpa,35Mpa,70Mpa and 105Mpa,it can be also designed according to the requirement of customer.5.Operation requirement (1)All the working pressures of parts in choke manifold should be matched with the working pressure of the BOP stack used; (2)Choke manifold should be installed at the place where operator approach it conveniently, pressure test should be executed as installation, while the sealing test pressure should be equal to the rated working pressure; (3)Pipeline should be so smooth and straight as possible, the corner of the pipeline should be made of 120~shaped forged steel bent pipe, which should have adequately large bore;(4)The working pressure gauge should be installed;(5)In winter, the choke manifold be able to work under a low temp condition.Parts List:ItemComponentQty Material1Skid Base12Hydraulic Choke13Five??”Way Piece141304Gate Valve15Pressure Gauge 16Needle valve17Companion Flange141308Gate Valve109Spacer Spool210Cross5413011Blind Flange7413012Spacer Spool113Gate Valve214Manual Choke2If you have any further requirements, please feel free to contact us by??

Industry: Energy-saving Lights
City: Xian
Tel: 86-029-87872212
Fax: 86-029-87872212
Posting Time: 2016-10-19 01:17:50
Send this offer to my friend
Why not send him an email to get more information?
Send Email to: Ms.Celia Wang
Your Name:  *
Your Email:  *
Company:  *
Country/Region:  *
Subject: *
Message: *